Before installing, check technical requirements and warnings carefully! When installing Tigerloop® always observe all local codes and ordinances! Remember to install the pump’s bypass plug! …

INSTALLATION: The Tigerloop BioTM should be installed indoors and close to the burner in a dry area with a temperature range of between 20° F and 105° F. In planning the installation, refer to …

Tiger Loop Kit for Standard Boilers, same as 10-0911 but includes mounting bracket for Smart Filter (item 3). Pipe and install as shown in photo above with the Tiger Loop in an upright position. Make …

Products like the oil/fuel de-aerator - Tigerloop, the draught stabiliser - Tigex and the NoTap method, which allows branch connections and pipe blocking on pressurised pipes, have made SPX Tigerholm …

In this comprehensive guide you will find all the information needed to understand this type of oil de-aerator and all the obvious benefits of a Tigerloop installation.

The installation must be performed by a qualified technician familiar with local codes and ordinances and licensed by proper authority where applicable.

See that the Tigerloop® is mounted firmly in a straight upright position using oil resistant lines for connection to the oil pump. Oil hoses are to be connec-ted between the oil pump and the feed and …

This article discusses the installation and use of oil line de-aerators to remove foam or frothing in heating oil supplied to an oil burner. We include a discussion about troubleshooting problems on oil heat that …

Installing a Tigerloop cuts the flow rate down the firing rate of the system, typically 1 gph, dropping vacuum and improving burner efficiency while putting less strain on your oil pump and motor.

Installing the oil line Check that the oil line is tight by pressure test. TheTigerloop® must not be connected while pressure testing. The oil line and connections must be completely tight. A leak in the …